Product Description
E-catalog
- Complex shapes or five faces is possible.
- Servo motor position is not changed with shaft tilting to prevent vibration while cutting.
- Absolute value motor are recommended for tilting axis.
Standard Dimension
Product
Reference
| Specifications / Model | Unit | TRNC-500C | TRNC-500D | |||
|---|---|---|---|---|---|---|
| Worktable Diameter | Ømm | Ø650 | Ø650 | |||
| Table Height | Horizontal | mm | - | 470 | ||
| Center Height | 90° | mm | - | 520 | ||
| Overall Height | 90° | mm | - | 815 | ||
| Center Bore Diameter | Ømm | Ø50H7 | Ø50H7 | |||
| Through-Hole Diameter | Ømm | - | - | |||
| Width Of T-Slot | mm | 18H7 | 18H7 | |||
| Width Of Guide Block | mm | - | - | |||
| Tilting Angle | deg. | -100°~+110° | -100°~+110° | |||
| Axial | Unit | Rotation | Tilting | Rotation | Tilting | |
| Minimum Input Increment | deg. | 0.001° | 0.001° | |||
| Indexing Accuracy | sec. | ★20" | ★20" | 15" | ★20" | |
| Repeatability | sec. | 4" | ★4" | 4" | ★4" | |
| Servo Motor (Model As Required) |
FANUC | α12i | α30i | α12i | α30i | |
| MELDAS | HF-354S | HF-703S | HF-204S | HF-453S | ||
| Speed Reduction Ratio | 1/120 | 1/120 | 1/120 | 1/120 | ||
| Table Rotation Speed (Motor) | r.p.m | 25 | 25 | 25 | 25 | |
| Allowable Inertia Force | kg-cm-sec2 | 204 | 204 | |||
| Allowable Turntable Torque | kg-m | 78 | 78 | |||
| Drive Pressure / Method | kg/cm2 | 35 / 油压 | 35 / 油压 | |||
| Clamping Torque | kg-m | 250 | 450 | 250 | 450 | |
| Allowable Load Capacity |
0° | kg | 500 | 500 | ||
| 0°~90° | 500 | 500 | ||||
| Allowable Workpiece Diameter | Ømm | Ø650 | Ø650 | |||
| Net Weight (Motor Excluded) | kg | 1220 | 1750 | |||
|
||||||
