TDRT-320
E-catalog
  • Direct-drive motor offers high speed running-up to 7 times faster than other ordinary models.
  • Reduction gear not required. No temperature displacement, Employs a high torque motor for high transmission efficiency. Allows for adopting hear exchanger.
  • Encoder equipped for high indexing accuracy.
  • Wholly circular hydraulic locking for high clamp torque.
Standard Dimension

Reference

Specifications / ModelUnitTDRT-125ATDRT-255TDRT-320TDRT-500
Worktable Diameter Ømm Ø125 Ø225 Ø320 Ø500(650)
Table Height Horizontal mm 375 285 380 -
Center Height 90° mm 200 220 300 -
Overall Height 90° mm 369 439 593 -
Center Bore Diameter Ømm Ø25H7 Ø50H7 Ø50H7 Ø50H7
Width Of T-Slot mm 12H7 12H7 14H7 18H7
Width Of Guide Block mm 14h7 18h7 18h7 -
Allowable Workpiece Diameter Ømm Ø125 Ø225 Ø320 Ø650
Tilting Angle deg. -100°~+100° -100°~+100° -100°~+100° -100°~+100°
Axis RotationTiltingRotationTiltingRotationTiltingRotationTilting
Minimum Input Increment deg. 0.001° 0.001° 0.001° 0.001° 0.001° 0.001° 0.001° 0.001° 0.001°
Indexing Accuracy sec.
Repeatability sec.
Allowable
Workpiece Diameter
ETEL   TMB
0140-070
TMB
0210-070
TMB
0210-050
TMB
0291-070
TMB
0210-070
TMB
0291-100
TMB
0360-070
TMB
0450-100
HEIDENHAIN
QSY-190D
Peak / Continuous Torque Nm 89.1 / 45.4 309 / 167 218 / 118 582 / 315 309 / 167 831 / 456 990 / 554 2330 / 1260 104 / 38
FANUC   DiS
60/400
DiS
150/300
DiS
150/300
DiS
250/250
DiS
150/300
DiS
500/250
DiS
1000/200
DiS
500/250
 
Peak / Continuous Torque Nm 130 / 65 380 / 170 380 / 170 600 / 225 380 / 170 1200 / 520 1900 / 840 2800 / 1400  
Speed Reduction Ratio   1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/120
Allowable Max. Rotation Speed r.p.m 352 185 220 135 180 130 100 90 25
Encoders Type HEIDENHAIN   ECN-225(±10") or RCN-226(±5") ECN-225(±10") or RCN-226(±5") ECN-225(±10") or RCN-226(±5") ECN-225(±10") or RCN-226(±5")
Pressure (Clamping System) kg/cm2 35 (Hyd.) 35 (Hyd.) 35 (Hyd.) 35 (Hyd.)
Clamping Torque kgf-m/N.m 33/323 85/833 85/833 180/1764 85/833 180/1764 250/2450 450/4410 450/4410
Allowable Load
Capacity
kg 125 (With Tail-Stock) 125 (With Tail-Stock) 300 (With Tail-Stock) 500 (With Tail-Stock)
0°~90 50 (With Tail-Stock) 80 (With Tail-Stock) 125 (With Tail-Stock) 300 (With Tail-Stock)
Net Weight kgs 180 350 400 1220
  1. ※Positioning accuracy according to encoder type.
  2. There are high-speed for option; please contact us for more details if necessity.
Standard Dimension

Additional files

TDRT-125A.jpgTDRT-255.jpgTDRT-320.jpgTDRT-500.jpg