PRODUCTS
CNC ROTARY TABLE
Horizontal Application
  • Worktable diameter Ø1000、Ø1500mm (Vertical & Horizontal application)
  • Dual lead worm drive for greater transmission torque
  • Hydraulic clamping system assures powerful clamping.
  • Minimum indexing angle of 0.001°

Reference

Specications / Model Unit HRNC-1000
Application Machine Type   Horizontal
Worktable Diameter Ømm Ø1000
mm □1000X1000
Overall Height mm 376
Center Bore Diameter Ømm Ø50H7
Through-Hole Diameter Ømm -
Width Of T-Slot mm 22H7
Width of Guide Block mm 22h7
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   α22i
MELDAS   HF-354S
Speed Reduction Ratio   1/360
Table Rotation Speed (Motor) r.p.m 8.33 (3000)
Allowable Turntable Torque kg-m 600
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 1000
Allowable Load
Capacity
kg 3500
Net Weight (Motor Excluded) kg 1500

Note :  1. There are circle and square of worktable for choice or or depend on design from customer's requirement.

Reference

Specications / Model Unit HRNC-1500S
Application Machine Type   Horizontal
Worktable Diameter Ømm Ø1500
mm □1500X1500
Overall Height mm 453
Center Bore Diameter Ømm Ø50H7
Through-Hole Diameter Ømm -
Width Of T-Slot mm 22H7
Width of Guide Block mm 22h7
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   α30i
MELDAS   HF-354S
Speed Reduction Ratio   1/360
Table Rotation Speed (Motor) r.p.m 4.16 (3000)
Allowable Turntable Torque kg-m 750
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 1000
Allowable Load
Capacity
kg 10000
Net Weight (Motor Excluded) kg 5000

Note :  1. There are circle and square of worktable for choice or or depend on design from customer's requirement.

Reference

Specications / Model Unit HRNC-1650
Application Machine Type   Horizontal
Worktable Diameter Ømm Ø1650
mm -
Overall Height mm 449
Center Bore Diameter Ømm Ø75H7
Through-Hole Diameter Ømm Ø77
Width Of T-Slot mm 22H7
Width of Guide Block mm 22h7
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   α22i
MELDAS   HF-354S
Speed Reduction Ratio   1/720
Table Rotation Speed (Motor) r.p.m 4.16 (3000)
Allowable Turntable Torque kg-m 850
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 1000
Allowable Load
Capacity
kg 5000
Net Weight (Motor Excluded) kg 4240

Note :  1. There are circle and square of worktable for choice or or depend on design from customer's requirement.