PRODUCTS
CNC ROTARY TABLE
Horizontal Application CNC Rotary Table
  • Worktable diameter 500, 630, 800mm (Horizontal application)
  • Dual lead worm drive for greater transmission torque
  • Hydraulic clamping system assures powerful clamping.
  • Minimum indexing angle of 0.001°

Reference

Specications / Model Unit HRNC-500S
Application Machine Type   Horizontal
Worktable Diameter mm 500x500
Overall Height mm 300
Center Bore Diameter Ømm Ø50H7
Through-Hole Diameter Ømm Ø50
Width Of T-Slot mm 18H7
Width of Guide Block mm -
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   α12i
MELDAS   HF-204S
Speed Reduction Ratio   1/180
Table Rotation Speed (Motor) r.p.m 16.6 (3000)
Allowable Inertia Force kg-cm-sec2 185.2
Allowable Turntable Torque kg-m 250
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 250
Allowable Load
Capacity
kg 500
Allowable Workpiece Diameter Ømm Ø500
Net Weight (Motor Excluded) kg 450

Note: 1. There are circle and square of worktable for choice or depend on design from customer's requirement.

Reference

Specications / Model Unit HRNC-630S
Application Machine Type   Horizontal
Worktable Diameter mm 630X630
Overall Height mm 320
Center Bore Diameter Ømm Ø50H7
Through-Hole Diameter Ømm -
Width Of T-Slot mm 18H7
Width of Guide Block mm -
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   α12i
MELDAS   HF-204S
Speed Reduction Ratio   1/180
Table Rotation Speed (Motor) r.p.m 16.6 (3000)
Allowable Inertia Force kg-cm-sec2 506.2
Allowable Turntable Torque kg-m 420
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 450
Allowable Load
Capacity
kg 800
Allowable Workpiece Diameter Ømm Ø630
Net Weight (Motor Excluded) kg 800

Note: 1. There are circle and square of worktable for choice or depend on design from customer's requirement.

Reference

Specications / Model Unit HRNC-800S
Application Machine Type   Horizontal
Worktable Diameter mm 800X800
Overall Height mm 360
Center Bore Diameter Ømm Ø50H7
Through-Hole Diameter Ømm -
Width Of T-Slot mm 18H7
Width of Guide Block mm 18h7
Minimum Input Increment deg. 0.001°
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Servo Motor
(Model As Required)
FANUC   α22i
MELDAS   HF-354S
Speed Reduction Ratio   1/180
Table Rotation Speed (Motor) r.p.m 16.6 (3000)
Allowable Inertia Force kg-cm-sec2 1225
Allowable Turntable Torque kg-m 800
Drive Pressure / Method kg/cm2 35 / Hydraulic
Clamping Torque kg-m 700
Allowable Load
Capacity
kg 3000
Allowable Workpiece Diameter Ømm Ø800
Net Weight (Motor Excluded) kg 1200

Note: 1. There are circle and square of worktable for choice or depend on design from customer's requirement.