PRODUCTS
CNC ROTARY TABLE
Right Hand Type CNC Rotary Table
  • 0.001° Minimum Positioning Increment
  • High Rigidity Structure: Disk and Shaft in a Single Piece – Increased Rigidity
  • Increased Wear Resistance – Worm Gear Drive Shaft
  • Can be Used Vertically or Horizontally
  • High Clamping Force: Full Circular Hydraulic Clamping, No Deviation During Heavy Machining
  • High Precision Bearing: Uses 2 High Precision Bearings for Support to Increase Positional Accuracy During Rapid Movement
  • Suitable for Cutting: Iron Castings & Steel Machining Applications: Large Molds with Multiple Cutting Surfaces Workpieces: Automotive Turbine Housings, Exhaust Manifolds, Tire Mold Machining, Valve Machining

Reference

Specications / Model Unit MRNC-255R
Worktable Diameter Ømm Ø255
Table Height Horizontal mm 167
Center Height Vertical mm 160
Overall Height mm 350
Through-Hole Diameter Ømm Ø33
Center Bore Diameter Ømm Ø40H7
Width Of T-Slot mm 12H7
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Clamping Torque (Hydraulic 35kg/cm2) kg-m 50
Allowable Load
Capacity
Vertical kg 100
Horizontal 250
With Tail-Stock 250
Allowable Inertia Force kg-cm-sec2 12.3
Allowable Turntable Torque kg-m 48
Allowable Workpiece Diameter Ømm Ø255
Net Weight (Motor Excluded) kg 93
Servo Motor
(Model As Required)
  FANUC MELDAS
  α8i HF-154S
Speed Reduction Ratio   1/180
Minimum Input Increment deg. 0.001°
Table Rotation Speed r.p.m 22.2

Note: 1. Choice of connector location at side, top or back of the rotary table.
       

Reference

Specications / Model Unit MRNC-320R
Worktable Diameter Ømm Ø320
Table Height Horizontal mm 222
Center Height Vertical mm 210
Overall Height mm 385
Through-Hole Diameter Ømm Ø42
Center Bore Diameter Ømm Ø40H7
Width Of T-Slot mm 12H7
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Clamping Torque (Hydraulic 35kg/cm2) kg-m 85
Allowable Load
Capacity
Vertical kg 150
Horizontal 350
With Tail-Stock 350
Allowable Inertia Force kg-cm-sec2 38.5
Allowable Turntable Torque kg-m 78
Allowable Workpiece Diameter Ømm Ø320
Net Weight (Motor Excluded) kg 174
Servo Motor
(Model As Required)
  FANUC MELDAS
  α12i HF-204S
Speed Reduction Ratio   1/180
Minimum Input Increment deg. 0.001°
Table Rotation Speed r.p.m 16.6

Note: 1. Choice of connector location at side, top or back of the rotary table.
      

Reference

Specications / Model Unit MRNC-400R
Worktable Diameter Ømm Ø400
Table Height Horizontal mm 250
Center Height Vertical mm 255
Overall Height mm 465
Through-Hole Diameter Ømm Ø42
Center Bore Diameter Ømm Ø40H7
Width Of T-Slot mm 12H7
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Clamping Torque (Hydraulic 5kg/cm2) kg-m 180
Allowable Load
Capacity
Vertical kg 200
Horizontal 500
With Tail-Stock 500
Allowable Inertia Force kg-cm-sec2 99.8
Allowable Turntable Torque kg-m 170
Allowable Workpiece Diameter Ømm Ø400
Net Weight (Motor Excluded) kg 262
Servo Motor
(Model As Required)
  FANUC MELDAS
  α12i HF-204S
Speed Reduction Ratio   1/180
Minimum Input Increment deg. 0.001°
Table Rotation Speed (Motor) r.p.m 16.6

Note: 1. Choice of connector location at side, top or back of the rotary table.

Reference

Specications / Model Unit MRNC-500/500N
Worktable Diameter Ømm Ø500
Table Height Horizontal mm 300
Center Height Vertical mm 310
Overall Height mm 565
Through-Hole Diameter Ømm Ø50
Center Bore Diameter Ømm Ø50H7
Width Of T-Slot mm 18H7
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Clamping Torque (Hydraulic 35kg/cm2) kg-m 250
Allowable Load
Capacity
Vertical kg 250
Horizontal 600
With Tail-Stock 500
Allowable Inertia Force kg-cm-sec2 185.2
Allowable Turntable Torque kg-m 250
Allowable Workpiece Diameter Ømm Ø500
Net Weight (Motor Excluded) kg 458
Servo Motor
(Model As Required)
  FANUC MELDAS
  α12i HF-240S
Speed Reduction Ratio   1/180
Minimum Input Increment deg. 0.001°
Table Rotation Speed r.p.m 16.6

Note: 1. Choice of connector location at side, top or back of the rotary table.
           2."N" means shortened motor cover, please contact us for shortening drawing if necessity.

Reference

Specications / Model Unit MRNC-63A
Worktable Diameter Ømm Ø630
Table Height Horizontal mm 400
Center Height Vertical mm 400
Overall Height mm 720
Through-Hole Diameter Ømm Ø100
Center Bore Diameter Ømm Ø100H7
Width Of T-Slot mm 18H7
Indexing Accuracy sec. 15"
Repeatability sec. 4"
Clamping Torque (Hydraulic 35kg/cm2) kg-m 450
Allowable Load
Capacity
Vertical kg 960
Horizontal 2000
With Tail-Stock 1920
Allowable Inertia Force kg-cm-sec2 405
Allowable Turntable Torque kg-m 420
Allowable Workpiece Diameter Ømm Ø630
Net Weight (Motor Excluded) kg 800
Servo Motor
(Model As Required)
FANUC   α12i α22i
MELDAS   HF-204S
Speed Reduction Ratio   1/180
Minimum Input Increment deg. 0.001°
Table Rotation Speed r.p.m 16.6

Note: 1. Choice of connector location at side, top or back of the rotary table.
           2."A" means high-load design (Equipped with radial and axial bearing).