PRODUCTS
CNC ROTARY TABLE
Vertical and Horizontal applications
  • Fixed Angle Indexing Increments (1 or 5) CNC Controlled.
  • Triple Plate Clutch Structure: High Precision, Suitable for Heavy Machining.
  • Can handle high rigidity off center cutting.
  • Pallet Changer Does Not Rise during operation to maintain accuracy.
  • Can Be used in Vertical or Horizontal Orientation.

Reference

Specications / Model Unit MINC-255R
Indexing angle deg. 1° or 5°
Worktable Diameter Ømm Ø255
Table Height Horizontal mm 195
Center Height Vertical mm 160
Through-Hole Diameter Ømm Ø33
Center Bore Diameter Ømm Ø40H7
Width Of T-Slot mm 12H7
Width Of Guide Block mm 18h7
Servo Motor
(Model As Required)
  FANUC MELDAS
  α4i HF-104S
Speed Reduction Ratio   1/120
Table Rotation Speed r.p.m 33.3
Clamping Torque (Hydraulic 35kg/cm2) kg-m 300
Allowable Load
Capacity
Vertical kg 125
Horizontal 300
Tail-Stock Used 300
Allowable Turntable Torque kg-m 250
Indexing Accuracy sec. ±5"
Repeatability sec. ±1"
Net Weight (Motor Excluded) kg 115

Note :  1. Choice of connector location at side, top or back of the rotary table.
      

Reference

Specications / Model Unit MINC-320R
Indexing angle deg. 1° or 5°
Worktable Diameter Ømm Ø320
Table Height Horizontal mm 250
Center Height Vertical mm 210
Through-Hole Diameter Ømm Ø80
Center Bore Diameter Ømm Ø100H7
Width Of T-Slot mm 14H7
Width Of Guide Block mm 18h7
Servo Motor
(Model As Required)
  FANUC MELDAS
  α8i HF-154S
Speed Reduction Ratio   1/120
Table Rotation Speed r.p.m 25
Clamping Torque (Hydraulic 5kg/cm2) kg-m 400
Allowable Load
Capacity
Vertical kg 175
Horizontal 350
Tail-Stock Used 350
Allowable Turntable Torque kg-m 350
Indexing Accuracy sec. ±5"
Repeatability sec. ±1"
Net Weight (Motor Excluded) kg 205

Note :  1. Choice of connector location at side, top or back of the rotary table.
       

Reference

Specications / Model Unit MINC-400R
Indexing angle deg. 1° or 5°
Worktable Diameter Ømm Ø400
Table Height Horizontal mm 260
Center Height Vertical mm 255
Through-Hole Diameter Ømm Ø80
Center Bore Diameter Ømm Ø120H7
Width Of T-Slot mm 14H7
Width Of Guide Block mm 18h7
Servo Motor
(Model As Required)
  FANUC MELDAS
  α8i HF-204S
Speed Reduction Ratio   1/120
Table Rotation Speed r.p.m 25
Clamping Torque (Hydraulic 5kg/cm2) kg-m 500
Allowable Load
Capacity
Vertical kg 250
Horizontal 500
Tail-Stock Used 500
Allowable Turntable Torque kg-m 450
Indexing Accuracy sec. ±5"
Repeatability sec. ±1"
Net Weight (Motor Excluded) kg 355

Note :  1. Choice of connector location at side, top or back of the rotary table.