PRODUCTS
CNC ROTARY TABLE
Left Hand Type CNC Rotary Table
  • Motor is mounted at the left.
  • 0.001° Minimum Positioning Increment
  • High Rigidity Structure: Disk and Shaft in a single piece – Increased Rigidity.
  • Increased Wear Resistance –Worm Gear Drive Shaft
  • High Precision Cross Roller Bearings
  • Can Be Used in Vertical or Horizontal Orientation
  • Pneumatic Clamping Brakes
  • Suitable for Cutting: Aluminum, Copper, Magnesium & Aluminum Alloys.
  • Machining Applications: Fine Finishing, Angular Column Cutting.
  • High Precision Workpieces: Medical Applications, Bicycle Components, Cell Phones, Precision Sculpting, 3C Industry Panels.

Reference

Specifications / Model VRNC-125L
Worktable Diameter Ø125
Table Height / Horizontal 152
Center Height / Vertical 110
Center Bore Diameter Ø25H7
Through-Hole Diameter Ø13H7
Width of T-Slot 12h7
Width of Guide Block 14H7
Index Accuracy 40 sec
Repeatability 4 sec
Clamping Torque (Pneumatic 5kg/cm2) 8 kg-m
Load Capacity Vertical 50kg
Horizontal 100kg
Tail-Stock 100kg
Allowable Inertia Force 2kg-cm-sec2
Allowable Turntable Torque 8.5kg-m
Weight (Motor Excluded) 25kg
Servo Motor (Model As Required) FANUC MELDAS
α2i HF-75S
Reduction Ratio 1/90
Minimum Input Increment 0.001°
Table Rotation Speed 44.4 r.p.m

Note: 1. Choice of connector location at side, top or back of the rotary table.
           2. The length of servo motor guard plate varies with dierent servo motors.

Reference

Specifications VRNC-170L
Worktable Diameter Ø170
Table Height / Horizontal 152
Center Height / Vertical 135
Center Bore Diameter Ø35H7
Through-Hole Diameter Ø35H7
Width of T-Slot 12h7
Width of Guide Block 18H7
Index Accuracy (sec) 20
Repeatability (sec) 4
Clamping Torque (Pneumatic 5kg/cm2) 8 kg-m
Load Capacity Vertical 75kg
Horizontal 1500kg
Tail-Stock 150kg
Allowable Inertia Force (kg-cm-sec2) 4.9
Allowable Turntable Torque 15kg-m
Weight (Motor Excluded)(kg) 38
Servo Motor (Model As Required) FANUC MELDAS
α4i HF-54S
Reduction Ratio 1/90
Minimum Input Increment 0.001°
Table Rotation Speed 44.4 r.p.m

Note: 1. Choice of connector location at side, top or back of the rotary table.
           2. The length of servo motor guard plate varies with dierent servo motors.

Reference

Specifications / Model VRNC-210L
Worktable Diameter Ø210
Table Height / Horizontal 152
Center Height / Vertical 160
Center Bore Diameter Ø45H7
Through-Hole Diameter Ø45H7
Width of T-Slot 12h7
Width of Guide Block 18H7
Index Accuracy (sec) 20"
Repeatability (sec) 4"
Clamping Torque (Pneumatic 5kg/cm2) 16kg-m
Load Capacity Vertical 75kg
Horizontal 1500kg
Tail-Stock 150kg
Allowable Inertia Force (kg-cm-sec2) 4.9
Allowable Turntable Torque 15kg-m
Weight (Motor Excluded)(kg) 43
Servo Motor (Model As Required) FANUC MELDAS
α4i HF-54S
Reduction Ratio 1/90
Minimum Input Increment 0.001°
Table Rotation Speed 44.4 r.p.m

Note: 1. Choice of connector location at side, top or back of the rotary table.
           2. The length of servo motor guard plate varies with dierent servo motors.